HIS ATI RADEON X1950Pro 256MB(256bit) AGP
pokud má někdo zájem tak tadyk sou fotky karty, chaldiče, jádra...
bohužel při sundávání pasiv. chlazení AC Accelera sem musel sloupnout papír.štítek kterej byl na okraji karty(přilepil se na ten pasiv)
a sou na ní ještě pasiv. chladiče pamětí (dokoupený, protže ty šmejdy od AC nedržely)
a podle
http://www.chipworks.com
se jedná přesně o tenhle čip (0703SSP)
ATI 215PADAKA12FG (RV570) Graphics Processing Structural Analysis Report (SAR-0705-201)
Published Date: 07/06/2007
Manufacturer: ATI
Part Numbers:
What's Inside:
This is a structural analysis report (SAR) of the ATI 215PADAKA12FG Graphics Processor obtained from ATI Radeon X1950 Pro Graphics Card. The 215PADAKA12FG Graphics Processor was manufactured using a 90 nm process. It features a 65 nm gate length. The devices with package date codes of 0703SSP and 0634AAP were used for this analysis.
The 215PADAKA12FG is fabricated using an eight metal, dual damascene copper, cobalt silicide (CoSi2), CMOS process. The backend uses carbon containing low-k interlevel dielectric (ILD) films for the metal 1 to metal 7 levels and nitride and oxide films for the upper level.
Report / Device Description:
The ATI 215PADAKA12FG (RV570) Graphics Processor is the heart of the ATI Radeon X1950 Pro Graphics card.
Snad sem někomu pomohl:o)
btw. tenhle obrázek na chladiči sem viděl snad jen 2x na netu...
PS: už se těším na tu samou ale s 512MB do PCIe :o)
bohužel při sundávání pasiv. chlazení AC Accelera sem musel sloupnout papír.štítek kterej byl na okraji karty(přilepil se na ten pasiv)
a sou na ní ještě pasiv. chladiče pamětí (dokoupený, protže ty šmejdy od AC nedržely)
a podle
http://www.chipworks.com
se jedná přesně o tenhle čip (0703SSP)
ATI 215PADAKA12FG (RV570) Graphics Processing Structural Analysis Report (SAR-0705-201)
Published Date: 07/06/2007
Manufacturer: ATI
Part Numbers:
What's Inside:
This is a structural analysis report (SAR) of the ATI 215PADAKA12FG Graphics Processor obtained from ATI Radeon X1950 Pro Graphics Card. The 215PADAKA12FG Graphics Processor was manufactured using a 90 nm process. It features a 65 nm gate length. The devices with package date codes of 0703SSP and 0634AAP were used for this analysis.
The 215PADAKA12FG is fabricated using an eight metal, dual damascene copper, cobalt silicide (CoSi2), CMOS process. The backend uses carbon containing low-k interlevel dielectric (ILD) films for the metal 1 to metal 7 levels and nitride and oxide films for the upper level.
Report / Device Description:
The ATI 215PADAKA12FG (RV570) Graphics Processor is the heart of the ATI Radeon X1950 Pro Graphics card.
Snad sem někomu pomohl:o)
btw. tenhle obrázek na chladiči sem viděl snad jen 2x na netu...
PS: už se těším na tu samou ale s 512MB do PCIe :o)
